Spajky je napisal/a: |
Najverjetneje je plata tudi "toasted". |
bostjang je napisal/a: |
1. What does the Power LED (DP4) actually mean? In our case the LED is not lit even when the power (not only standby) is on. Is it necessary for CPU to do some initialization in order to light the LED? Can a faulty CPU be the cause that the LED is not lit?
3. Can the board work with OSP2218GAA6CX? If not, is it safe to install it anyway? |
SuperMicro1 je napisal/a: |
1) DP4 is a power LED, and it means power is present on the MB.
3) No, OSP2218GAA6CX is an older CPU which will not work on this board. The supported processors are 237x, 238x, 235x and 24xx. |
SuperMicro2 je napisal/a: |
1) If the LED DP4 is not on, this means that the MB is dead.
3) The MB doesn’t support 2218 processor. |
DusanK je napisal/a: |
Če prav razumem imaš povsem novo plato in nov napajalnik, CPU-ja ter rame pa imaš iz prejšnje plate? |